Skip to content
SOUNDSTREAM HDHU.14si & HDHU.9813RG ONLY $699.99!
SOUNDSTREAM HDHU.14si & HDHU.9813RG ONLY $699.99!

Focal Plug & Play Speakers | 2014-2023 Harley Davidson Touring

Focal Plug & Play Speakers | 2014-2023 Harley Davidson Touring
Please follow these installation tips when you're ready to install your new
Focal 6.5 inch Plug & Play Speakers
in your 2014-2023&Harley-Davidson® Touring Motorcycle.


Included parts:
  • Focal 6.5 inch component speakers
  • Crossover with Note Cycles T-Harness
  • Focal grille (1 pair for either Street Glide or Road Glide)

Tools needed:

  • Phillips head screw driver
  • Cutters
  • Zip Ties
  • T25 torx driver
  • 3/16 allen wrench

Step 1

Remove the speaker pods from your motorcycle:
  • This will vary by year and model. You will need to remove the speaker pod assembly to be able to fully remove the 6.5 inch speakers.
  • Once the speaker pod is removed, remove your existing speakers.

Step 2

Prepping the Focal speakers for install:

  • Insert the tweeter into the speaker grille specific for your motorcycle:
    • Round grille - Street Glide/Electra Glide
    • Tear Drop - Road Glide
  • With the Focal logo facing you, insert the wiring for the tweeter through the opening in the grille and press the tweeter into place.

Step 3

Installing the Focal speakers into your speaker pod:

  • Use the provided crossover and T-harness:
    • Connect the uninsulated 1/8th and 1/4 inch spade connectors to the factory wiring in your speaker pod. 
    • Use the insulated female connectors nearest the speaker pod to connect to your Focal speaker. Again match up the 1/8th and 1/4 inch spade connectors. 
    • Use a zip tie to secure any loose wires before inserting them into the speaker pod. 
      • Make sure that you leave enough wire (3-4 inches) outside the pod to connect to your tweeter.
  • Secure the mid-bass speaker to the speaker pod.

Step 4

Replacing the speaker grilles and pods:

  • Street Glides/Electra Glides:
    • Remove the factory grille.
    • Install your new Focal grille with tweeter into the fairing and secure with the factory screws. 
    • Connect your tweeter wire to the T-harness by matching up the 1/8th and /4 inch spade connectors. 
    • Reinstall your speaker pod.
  • Road Glides:
    • Reinstall your speaker pod. 
    • Connect your tweeter wire to the T-harness by matching up the 1/8th and /4 inch spade connectors. 
    • Install your new Focal grille with tweeter into the fairing.

Congratulations on installing your new
Focal Plug & Play Speakers!

Next article