Diamond Audio Stage II Bundle | 2014+ Harley-Davidson Touring

WHAT'S INCLUDED:

• Diamond Audio Fairing Horn Speakers
• Diamond Audio Amplifier 4-Channel or the Diamond Audio Amplifier 2-Channel
• Diamond Plug & Play Amplifier T-Harness incl. the Diamond Audio Power/Ground remote harness kit

MP654 Product Highlights: 

• Fits Harley-Davidson 2014+
• Saddlebag lid cutout template for exact fitment included 
• Includes .5" 6x9 spacer ring
• Includes MP694 motor sports 6x9 marine grade speaker w/ water-resistant cone
• Includes plug & play wire harness w/ DLED wiring
• 150W RMS/300W Max power handling
• Ferrite Strontium high temp magnet structure
• Heavy duty die-cast aluminum basket
• 1.5" 4 Ohm - single layer high temp voice coil with black coated voice coil former for Woofer
• 1.0" 8 Ohm - single layer high temp voice coil for tweeter
• Advanced voice coil heat sink design for better heat dissipation
• Frequency response: 80Hz - 18Khz
• High sensitivity 101dB 1W/1M
• 12dB crossover
• Mounting depth: 3.99" / 101.3mm
• Mounting diameter: 8.86" x 5.98" / 225 x 152mm

MP654 Specifications: 

• Speaker size: 6.5"
• Nominal Impedance (ohms): N/A
• RMS power rating: 150W RMS
• Max power rating: 300W Max
• SPL (dB-MidBass): 92.7
• SPL (dB-Tweeter): 107
• Re [series]: 3.2
• Qms: 10.73
• Qes: .47
• Qts: .45
• Fs-Free Air Resonance (Hz): 103.3
• Vas (Liter): 6.6
• Cms (mm/N): .24
• Mms (g): 9.7
• Sd 9(cm2): 138.9
• BL (T*M): 6.5
• Xmax - Inch(mm): 1.0
• Pwr (W) NOM/MAX: 150/**300
• Total Diameter: 6.52" (165.5mm)
• Mounting Diameter (inch/mm): 5.73" (145.5mm)
• Mounting Depth: 3.33" (91.6mm)
• Total Depth: 3.88" (98.6mm)
• Magnet Diameter (E): 3.94" (100mm)

Product Highlights 2-Channel Amp:

• Status LED's
• Sensitivity (Input Gain Adjustment)
• Turn-On Options
• Crossover Selection Switch
• LP/FULL/HP
• Bass Boost
• RCA Input Harness
• Speaker Output Harness
• Remote Level Control
• Sub-Sonic Adjustment
• Power Input Connections

Product Highlights 4-Channel Amp: 

• Fits Harley-Davidson 1998 - 2023 Harley-Davidson
• 150W x 4CH @ 2 Ohm / 80W x 4CH @ 4 Ohm / 300W x 2CH @ 4 Ohm Bridged RMS Power Output
• Input Sensitivity: 0.2 - 10 Volt
• Crossover Filter: 40-400Hz, 12 dB Per Octave Slope
• Frequency Response: 10-33KHz
• Selectable REM / VOX / DC Turn On Modes
• Selectable X-Over: LPF / FLAT / HPF
• Selectable 2CH / 4CH Input Modes
• Dimensions: 9.7" x 4.0" x 1.46" / 230.5 x 103 x 37.2 mm
• Disconnected RCA Input & Speaker Output Harness Kits Included

Specifications 2-Channel Amp:

• 250W x 2CH @ 2Ω
• 150W x 2CH @ 4Ω
• 500W x 1CH @4Ω Bridged RMS Power Output
• Input Sensitivity: 0.2-10 Volt
• Crossover Filter : 40-400Hz, 12dB Per Octave Slope
• Frequency Response: 10-33KHz
• Selectable REM / VOX / DC Turn On Modes
• Selectable X-Over: LPF / FLAT / HPF
• Dimensions: 7.89” x 4.1” x 1.46” / 200.5 x 103 x 37.2 mm
• Remote Bass Knob Included
• Disconnected RCA Input & Speaker Output Harness Kits Included

Specifications 4-Channel Amp: 

• Amplifier: 4 Channel
• RMS Power Rating: 600W RMS
• RMS Power (2 Ohm): 150W x 4
• RMS Power (4 Ohm): 80W x 4
• RMS Bridge (mono 4 Ohm): 300W x 2
• Topology: Full Range Class D
• Power Supply: Full PWM
• Power Supply (threshold): 10.0VDC - 17.0VDC
• Idle Current: (0.7A)
• Distortion - THD (1KHz @ 4 Ohm): 0.5%
• Distortion - S/N Ratio (A Weight @ 1W): -85dBA
• Distortion - S/N Ratio (A Weight @ FP): -101.1dBA
• Input Sensitivity Low: 200mV - 10.0V
• Input Sensitivity High: N/A
• Input Impedance - Low Input Level: 20K Ohm
• Input Impedance - AUX Input Level: 20K Ohm
• Output Impedance: 0.018 Ohm
• Damping Factor (50Hz @ 4 Ohm): >70
• Bandwidth (-3dB): 10Hz-35Hz
• Crossover (-12 dB/ Oct) Variable High-Pass: 40Hz - 400Hz
• Crossover (-12 dB/ Oct) Variable Low-Pass: 40Hz - 400Hz
• FUSE Ratings - ATC: 40A
• Dimension (L x W x H): 9.7" x 4.0" x 1.46"